The easiest way is to check the transmission identification tag, which is located under one of the servo bolts on the passenger-side servo. On some transmissions the tag may be located under one of the driver-side servo bolts. There should be a series of numbers and letters which tell what year it is.
How do I know if my transmission is a C4 or C6?
Ascertain where the drain plug is situated at the transmission pan. If the plug is at the side of the transmission’s pan, it is the C6 but on the bottom means it’s a C4.
How do I identify my Ford transmission?
The prime identification source is the pan located on the bottom of the transmission; its shape and bolt count is indicative of which model transmission is present.
- Inspect the pan found on the bottom of the transmission. …
- Count the number of bolts on the transmission pan.
Are all C4 transmissions the same?
A redesigned C4 valve body and transmission case came along in 1970, which was used for the C4’s production life through 1981. In Drive, the C4 shifts the same as the Dual-Range at the large green dot with a normal 1-2-3 upshift program and the same gear ratios throughout.
What kind of transmission do I have?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
Is a Cruise O Matic a C4?
Because the original Ford-O-Matic started in second rather than first, it was marketed as a two-speed after the new three-speed transmissions were introduced. Production continued until it was replaced by the C4 in 1964 in smaller Ford and Mercury vehicles.
How much power can a C4 transmission handle?
I’d say at least 400 ponys as long as it is in good shape.
Will a C4 transmission fit a 390?
*This Performance Automatic Bellhousing is designed to use the factory starter and flexplate. … Order this Performance Automatic PA26390 Pro Fit Bellhousing for your 390, 427 or 428 FE Engine with a C4 Automatic Transmission today from CJ Pony Parts.
How can I tell how old my Ford transmission is?
How to Identify Ford Transmissions
- Take a picture of the transmission. …
- Measure the distance from the bellhousing to the rear of the transmission.
- Look at the transmission pan and note the shape and the number of bolts. …
- Find the year of the vehicle the transmission came from.
What is the difference between a C4 and C5 transmission?
The C4 adapter housing was made of cast iron, whereas the C5’s was made of aluminum. The C4 was a case fill transmission with the dipstick in the case; the C5 employed a pan fill with the dipstick in the pan.
How do I know if I have a 4R70W transmission?
Look for the electronic cable and electrical plug. AODE and 4R70W transmissions have a plug on the driver’s-side rear of the transmission housing. This is where the electronic control cable plugs into the unit and is what differentiates the older AOD transmission from AODE and 4R70W units.
Can you tell transmission type from Vin?
Why can’t I determine the transmission type for my VIN? … Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.
What vehicles use the 4R70W transmission?
Cars that used the 4R70W transmission include:
- Ford F-150 Series pick-up trucks, E-150 Series vans, Expeditions, Explorers, Crown Victorias, Thunderbirds, and Mustangs.
- Lincoln Town Cars and Mark VIIIs.
- Mercury Grand Marquis, Cougars, Mountaineers and Marauders.