Is the Dodge Caravan 3.3 a good engine?
He (the mech) did say that of the “mini van world”, the caravan is the best option, to quote…. “they made them first, they made them best.” The 3.3 is a great engine. Reliability is among the best.
Is the Chrysler 3.3 engine reliable?
Some 3.3/3.8L V6s have racked up well over 200,000-plus miles on the odometer with no major problems (except some oil burning), while others have called it quits at 70,000 to 80,000 miles. Engine noise is one of the most common complaints among minivan owners.
Is the Dodge 3.8 V6 a good engine?
The 3.8 liter V6 was a conservatively designed, wider-bore, longer-stroke version of the then-new 3.3-liter V6. It was a good, solid engine from the start – not the highest performer or the lowest, but relatively quiet, driveable, and reliable.
|Fuel ||Regular (US: 87 octane)|
What is a 3.3 L engine?
The first of the family, the 3.3 liter engine’s actual piston displacement is 3.3 L; 201.4 cu in (3,301 cc) with a 93 mm × 81 mm (3.66 in × 3.19 in) bore and stroke. … The 3.3 has a timing chain, and is an interference engine meaning that the valves will collide with the pistons in the event of a timing chain failure.
Is the 3.3 L V6 a good engine?
The 3.3 V6, with its 170 HP, is a decent performer. Although the engine is good, it does have a few faults that you should be aware of. Let’s take a look at them.
Is the Dodge Caravan a reliable car?
The Dodge Grand Caravan Reliability Rating is 4.0 out of 5.0, which ranks it 2nd out of 8 for minivans. The average annual repair cost is $673 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the Grand Caravan.
How many cylinders is a 3.3 engine?
|Aspiration||Atmospheric / Hybrid|
|Configuration & cylinders||V configuration, six cylinders|
Is the 3.8 L Jeep engine good?
Actually the 3.8L is a very reliable engine. Chrysler ran the engine for over 20 years for a reason. The only problem with the 3.8L was it was paired with a Automatic transmission that wasn’t getting it into the right power band for a heavier JK and especially JKU. Once regeared it solved that issue.
How much HP does a 3.8 V6 have?
An Awakening… In box stock form, the 3.8L Essex V-6 produces 145-150 hp at the crankshaft. According to Super Six Motorsports, that’s 0.625 hp per cubic inch or 38.2 hp per liter.
How much HP does a 3.8 supercharged have?
The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower. The 3800 and 3800 SC Supercharged engines offered 230 foot-pounds of torque at 4,000 RPM and 380 foot-pounds of torque at 5,200 RPM, respectively.
How reliable is the 3.6 Pentastar?
Despite that they had some issues early on, the 3.6L V6 Pentastar is great, durable, one of the most reliable engines available on the market right now. With proper maintenance, the 3.6 Pentastar engine longevity is around 250-300k miles (there are even a few cases of the Pentastar last up to impressive 500,000 miles).
How many horsepower is a 3.3 L engine?
Ford 3.3L Ti-VCT V-6 Specs
|Engine:||Ford Motor Company 3.3L Ti-VCT V-6|
|Peak Horsepower:||290 hp @ 6,500 rpm|
|Peak Torque:||265 lb-ft @ 4,000 rpm|
|Fuel Economy:||4×2||19 city, 25 hwy, 22 combined|
|4×4||18 city, 23 hwy, 20 combined|
Does Ford make a 3.3 liter engine?
The 3.3L Ti-VCT V6 delivers responsive performance with 290 horsepower and 265 lb. … The 3.3L also has the Ford port-fuel and direct-injection (PFDI) system with two injectors per cylinder — one mounted in the air intake port, another inside the cylinder.
Is 3.5 or 2.7 EcoBoost better?
Performance. The greater displacement of the 3.5L EcoBoost leads to its massive power output and best-in-class towing capacity, while the lower displacement of the 2.7L EcoBoost contributes to its better fuel efficiency.