The 4L60-E is found in nearly every GM rear-wheel-drive application, including the C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, Firebird, Camaro and Corvette.
What years will a 4L60E transmission fit?
What Vehicles Have A 4l60e Transmission?
- Buick Rainier 2004-2007.
- Buick Roadmaster 1994–1996.
- Cadillac Escalade 1999-2000, 2002-2005 (models with LM7/5.3L V8 Also with 6.0 LQ9)
- Cadillac Fleetwood 1994–1996.
- Chevrolet Astro 1993-2005.
- Chevrolet Avalanche 2002-2008.
- Chevrolet S-10 Blazer 1994-2005.
- Chevrolet Camaro 1994–2002.
What Motors bolt up to a 4L60E transmission?
Also, as an aftermarket part, the 4L60E transmission is a popular automatic transmission for Generation III LS motors like the LS1. Generally speaking, a 700R4/4L60E will fit most vehicles initially offered with a TH350 or TH400 transmission.
Will a 4L60E work without computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. … Never mind TCC lockup; without a computer, the trans won’t shift at all.
Will a 4L60E from a v6 fit a V8?
Registered. The 4L60E in the NNBS is identical except the harness in 2009-2013. 2007.5-2008 are the exact same regardless if is v6 or v8. The converter or flexplate may be different tho.
How can you tell the difference between a 4L60E and a 4L60?
The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.
How do I know if I have 4L60E or 4L65E?
The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.
Will a 5.3 Vortec bolt up to a 4L60E?
Any vortec will bolt on 4.8, 5.3, 6.0, 8.1. You’ll need a tune if you get anything besides a 4.8.
How much HP can a 4L60E handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
What does 4L60E stand for?
The 4L60E Transmission is a series of automatic transmission from General Motors. Previously named the THM700, and later renamed to 4L60 to fit into GM’s new naming convention. The “E” stands for the electronically shift controlled version of the 4L60 automatic transmission.
Can I swap my 4L60E with a 700R4?
If you’re going to trade out your 4l60E for a 700R4, try to use an 87 on up. Both the trannies basicly use the same internal parts, so one shouldn’t be that much better than the other. Over the years GM did fix some of the weak points, with these trannies and the aftermarket, took care of some more.
What year 4L60E are the same?
Major Differences Between 700R4/4L60E/4L65E Transmissions
|Year Range||1982 to Early 1993||1993 to Present|
|Case Style||1-Piece||1-Piece or 2-Piece|
|Pan Style||Shallow||Shallow 1993-1997 Deep 1997-UP|
Can I replace my 4L60E with a 4L65E?
Upgrading to the 4L65E is advisable in towing applications and where horsepower numbers are up to 500. The 4L60E also uses a four-pinion front planetary carrier, which is more expensive than the rear unit. For cars making over that number, there is a front planetary upgrade as well.
Will a 4L60E transmission fit a 350?
Premium Member. The 4L60E will bolt straight up to your 350. :yes: You will need some way to control the tranny though. The OD is electronically controlled, hence the “E” at the end of the 4L60.