**Contents**show

A basic charger usually charges at around 2 amps – and so needs 24 hours to deliver the 48 amps needed to fully charge a flat, 48 amp hour battery. But there is a wide range of chargers with different charge rates on the market – from 2 to 10 amps. The higher the charge output, the faster a flat battery is recharged.

## What amp should I charge my 12V battery?

A 12-volt automotive battery, for instance, takes a while to charge. In fact, fast charging for this kind of battery is not recommended. 10 amps are the recommended current.

## Should I charge my battery at 2 or 6 amps?

For faster charging, get a higher amperage charger.

If you need a charge in a hurry, it makes sense to increase the amperage. Going above 12 amps can be risky if done for an extended time. Charging for too long puts the battery at risk of exploding. To avoid this, only use chargers above 12 amps for an hour at a time.

## Do you charge a car battery on 2 amp or 10 amp?

You would use 10 amperes on a car battery and 2 ampere on whatever small batteries you might want to charge that still use the same voltage. For example, a motorcycle battery could use the 2 ampere charging option.

## Will a 15 amp charger charge a car battery?

If we were recharging the battery with a 15-amp battery charger, the recharge time would be roughly 3.6-hours. Again, this example does not take into account the multi-step charging approach of most smart battery chargers, but it does serve as an excellent guide to battery recharge times.

## How long should it take to charge a 12 volt car battery?

Car batteries usually hold 48 amps, so it will take about 12 hours to reach a full charge using a 12 volt charger. It takes around 30 minutes for an electric vehicle to charge to 80%.

## What is the proper way to charge a car battery?

How To Charge A Car Battery

- Prepare The Battery. …
- Turn Off All Car Electronics. …
- Remove The Negative/Ground Cable, Then Positive. …
- Clean The Battery Terminals. …
- Connect The Battery Charger. …
- Remove The Charger Once Charging Is Complete. …
- Summary. …
- Related Resources.

## Can I charge a car battery at 50 amps?

Generally, it should take about 1 hour to charge a car battery at 50 amps. However, it may take longer if your charger isn’t compatible with the battery or if there’s some underlying defect with the battery itself. In those instances, it could take up to 5 hours.

## How do you know when a car battery is fully charged?

A fully charged battery will typically display a voltmeter reading of about 12.6 to 12.8 volts. If your voltmeter is showing a voltage anywhere between 12.4 and 12.8, that means your battery is in good shape. Any voltage above 12.9 volts is a good indicator that your battery has excessive voltage.

## How many amps is a car alternator?

Most factory alternators are rated at 65 to 100 amps and are capable of handling a vehicle’s basic accessories—headlights, gauges, fuel pumps, transmission, A/C, etc.

## Is it better to charge a car battery fast or slow?

You don’t need to charge your car fast. A slow charge is much better, as batteries tend hold the charge for a longer period of time with this method. The trickle charger has an electric cord with a plug and two jumper cables with alligator clips. Check the terminals of the battery and clean them.

## How long should you leave a car running to charge the battery?

Be sure to drive your car for about 30 minutes before stopping again so the battery can continue to charge. Otherwise, you might need another jump start.

## How long will it take to charge a car battery at 10 amps?

If you are using a battery charger, a 10 amp charger will take 4 to 11 hours to fully charge the battery, a 2 amp charger will take 2-4 days.

## How many amps does it take to start a car?

400 to 600 amps will be more than enough to jump-start any normal, consumer vehicle. Commercial vehicles may require up to 1500 or 2000 amps. Compact and small vehicles can be boosted with as little as 150 amps.

## How long does it take to charge a car battery at 15 amps?

The time it takes to properly charge a battery depends on its current discharge value and your charger’s amperage specification. A charger with 15 amps, for instance, will take about two hours to fully charge a battery at a 25-percent discharge value.

## How big of a trickle charger do I need?

You need to ensure that your trickle charger has a higher amp-hour value than your vehicle’s battery. Most chargers have adjustable ampere rates, but ideally, a maintenance charger needs to be under 5 amps while a fast charger should be at least 10.