How reliable is the 6R80 transmission?

How strong is the 6R80 transmission?

The 6R80 has already been field-proven to accept up to 1000HP in stock form, with only ECU tuning. With aftermarket components, the 6R80 will likely handle much more power. Stock applications already employ a multi-plate torque converter clutch, enabling greater power handling in lockup.

What is the strongest Ford transmission?

There is the Ford AOD (automatic overdrive) transmission on one hand, and the Turbo 400 (TH400), on the other. However, car enthusiasts may be quick to settle for the Turbo 400 due to the popular belief that it is the king of performance transmission.

What years did Ford use the 6R80 transmission?

The 6R debuted in 2005 in the 2006 model year Ford Explorer and Mercury Mountaineer. The 6R80 is featured in 2009 to present Ford F-150 pickups. It features torque converter lockup capabilities in all 6 gears and an integrated “Tow/Haul” mode for enhanced engine braking and towing performance.

IT IS INTERESTING:  Who has better parts AutoZone or Advance Auto?

Are all 6R80 transmission the same?

The 6R80 can be found behind the 3.7L V-6 all the way up to the 6.2L V-8. Ford has stated that while the transmission is used in multiple applications, each transmission is optimized and integrated differently depending on the engine it is mated to.

How much HP can a 10R80 handle?

Built Ford Coyote 6R80 and 10R80 automatic transmissions can take 1,000 hp.

Will a 6R80 bolt to a 351w?

Use this adapter to bolt your 6R80 Ford transmission to any engine block using the standard Small Block Ford bolt pattern. This kit works with pushrod 5.0 / 302″ and 5.8 / 351 Windsor engine blocks.

Which is better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

What is the most reliable transmission ever made?

The TH425 – The only front wheel drive transmission on the list has to be the beefiest and most robust ever built. The TH425 was constructed with the intention of living behind big 455ci and 500ci engines in Oldsmobiles and Cadillacs.

Who makes the most reliable automatic transmission?

Lexus and Toyota — which rely on older transmissions in many of their models — were the best-performing brands in the survey. Lexus or Toyota has topped the survey since 2011. Audi, Mazda and Subaru rounded out the top five. The worst performers were Infiniti, Cadillac, Ram, Jeep and Fiat among 28 brands.

IT IS INTERESTING:  You asked: Can you tighten up car doors?

How much is a 6R80?

6R80 Transmission – $2,595 | 5-Year Warranty. Money Back Guarantee.

Is the MT82 a good transmission?

Even though the MT82 is the Mustang’s most modern transmission, it has its fair share of problems. … An investigation conducted by the National Highway Traffic Safety Administration revealed no safety risks with the MT82 transmission. That said, many Mustang owners have experienced these issues firsthand.

What you need to know about Ford’s Powershift transmission problems?

As described by owners of the vehicles, the primary, recurrent issues are a shuddering feeling while accelerating from a stop—like someone who can’t feather the clutch properly on a stick shift—followed by a rough 1-2 upshift that again sends a vibration throughout the vehicle.

What transmission does my 2014 F150 have?

All engines are mated to a six-speed automatic transmission.

How do you check the transmission fluid on a 6R80?


Shift the transmission through all gear ranges and hold each range for 5 seconds. Operate the transmission until the transmission fluid temperature is between 175° F and 190° F. Remove the dipstick and verify fluid level is in the hot temperature range.

How many speeds is a 4r100?

Yup, the 4r100 is 3 gears forward and overdrive and a converter lockup which essentially makes it feel like a 5 spd.