Frequent question: Can I use transmission hose for coolant?

What type of hose can be used for coolant?

Coolant Hose

Coolant hoses come in two flavors – heater hose and radiator hose. They hoses are made the same, but the sizes are real difference. Heater hose is generally ½, 5/8, and ¾-inch in diameter. There are different types of heater hose, from standard to heavy duty.

Can I use a fuel hose for coolant?

The very knowledgeable guy recommended fuel line as it was rated for the heat range and resistant to most anything. You will be fine.

Can hydraulic hose be used for coolant?

Low-pressure hydraulic hoses withstand operating pressures to 300 psi. … They are found on low-pressure hydraulic applications and transmit petroleum-based fluids, diesel fuel, hot lubricating oil, air, glycol antifreeze, and water.

Can I use transmission cooler hose for power steering?

You may also encounter problems using these hoses in a power steering application because their relative inelasticity may not provide adequate pulsation dampening. So you can probably use power steering hose in a transmission oil cooler application, but not vice versa, at least not in a pressure line application.

IT IS INTERESTING:  What is the role of carbon brushes in electric motor Class 10?

What hoses connect to coolant reservoir?

An overflow hose connects to the radiator below the cap and the reservoir tank to store overflow of coolant. As pressures in the cooling system increase due to coolant temperatures, a valve on the radiator cap permits coolant back into the reservoir to help ease the build-up of pressure and prevent coolant loss.

What is radiator hose made of?

Coolant hoses are made of reinforced synthetic rubber made to withstand heat, vibration, pressure, and cooling system chemicals.

Are silicone coolant hoses better?

Why are silicone hoses better than rubber? Silicone hoses benefit from superior flexibility compared to rubber. They maintain this flexibility over their lifespan unlike rubber hoses. This reduces the risk that your hoses will split, harden, or become dry rotted.

What is fuel-injection hose?

Fuel-injection hoses are suitable for conveying fuel to fuel-injected engines. The hoses’ cover resists damage from abrasion, oils, heat, and ozone. The hoses are designed to provide low permeation and minimal fuel vapor loss.

What do you use hydraulic hoses for?

Hydraulic hoses are used for two primary purposes; to allow movement between two port locations or to reduce the effects of vibration. … Hydraulic hose is also the plumbing of choice to dampen noise and vibration in hydraulic machinery.

How much heat can a hydraulic hose handle?

Rubber blends in typical hydraulic hose are rated for operation to 212° F (100° C). However, a number of hose manufactures offer a wide range of products suitable for higher temperatures.

Can hydraulic hoses be used for water?

Hydraulic hoses are the ideal choice for efficient water transportation which requires a long lasting and industrial strength piece of equipment.

IT IS INTERESTING:  Question: How do you fix a flooded engine?

Can Fuel Injection hose be used for transmission fluid?

Fuel line will work for oil or atf. They also say if it is high pressure on the hose”fuel injection”. Just dont use vacuum hose. You will be fine with high pressure fuel line, but do not use the low pressure stuff.

Can you use fuel line transmission line?

Fuel line hose isn’t up to the pressures normally associated with automatic transmissions. Use the proper stuff. If that thing splits or blows loose and hoses down any portion of your exhaust system hot enough to ignite it, your truck could end up burned to the ground.

Can you use heater hose for PCV?

4 Answers. Yes, you could use any fuel and oil resistant hose. They are typically made of silicone, polyurethane or rubber.